STIHL GS 461 Consumables

The Diamond Abrasive Chain GBE is an entry-level chain for the swift, quiet and low-vibration wet-cutting of abrasive materials such as brick and cinder blocks. Every second drive link features a pre-sharpened diamond segment.

Features:

• The special hard coating on the rivet holes and the drive links gives the chains low chain elongation.
• Re-tensioning of chains is required less regularly due to the rivet holes and drive links.
• The chains’ special layer structure gives them a harder coating on the outside than on the inside.
• This makes the surface layer harder than the cut material particles, reducing wear during the cutting process.
• The chain’s material characteristics maintain elasticity.

 

The Diamond Abrasive Chain GBM is perfectly suited for the quick, quiet and low-vibration wet cutting of concrete, reinforced concrete and hard stone. Every drive link features a pre-sharpened diamond segment.

Features:

• The special hard coating on the rivet holes and the drive links gives the chains low chain elongation.
• Re-tensioning of chains is required less regularly due to the rivet holes and drive links.
• The chains’ special layer structure gives them a harder coating on the outside than on the inside.
• This makes the surface layer harder than the cut material particles, reducing wear during the cutting process.
• The chain’s material characteristics maintain elasticity.

 

Guide bars provide precise guidance to the chainsaw with minimal friction loss. They have to take on the toughest jobs without warping. This guide bar was designed especially for the GS 461 and features water channels. Even the sprocket nose is washed with water. The bar also has a hardened chain track and two additional holes for attaching the saw chain, which extends the tensioning range. Thanks to the front-facing positioning of the nozzles in the sprocket cover, the operator doesn’t get wet when the tool is in use.

Features:

• STIHL guide bars are optimised in terms of a reduced kickback tendency.
• Lateral control of the saw chain is provided by a continuous groove around the perimeter of the guide bar through which the drive links run.
• The groove also channels the chain oil. The chain slides over the guide bar between the lugs that remain at both sides.